|
|
200 / 400 V Amplifier
 Technical Data (200V version)
| Power supply |
AC 110 / 220 / 240 V, 50/60 Hz ±10%, max. 110 W (factory set) |
| Fuse rating (2 pcs.) |
500 mA T (slow blow) 220 / 240 V 5x20mm (1 A T for 110 V version) |
| Output voltage |
max. ± 200 V (± 400 V) |
| Output current |
± 100 mA (min. ±50 mA |
| Output resistance (approx.) |
100 Ω |
| Power bandwidth (-3 dB) |
min. 100 kHz , small signal min. 200 kHz |
| Slew rate |
min. 100 V/µs |
| Input voltage |
± 5 V (± 10 V)
input impedance about 1 MΩ |
| Amplification |
40 V/V ± 0.2 % |
| Voltage monitor output |
max. ± 5 V , 1/40th of output voltage at terminal
± 0.2 %, ± 5 mV , max. 5 mA |
| Disable input |
open or high level -> disable
shorted or low level -> enable,
Input impedance: about 7 kΩ |
| Environment Temperature |
0...40°C, RH 0..60 % non-condensing, max height 2000 m
above sea level, indoor use only, pollution category 1 |
| Dimensions (approx.) |
W 30 cm/ L 30 cm /H 20 cm |
Weight (approx.) |
9 kg |
|
|
MEMS Products